Fiber/Wire Guides
Fiber Guides
To determine the
fiber guide that you need measure the fiber coating/buffer diameter
in microns (µm) or if you are looking for a ribbon guide count
the number of fibers and the kind of arrangement/coating they have.
Compare the number on the charts listed below.
Ordering Procedures
Using the charts
below determine which part(s) you would like to order and write them
down before you call. Our telephone number is (508) 761-9161
| FIBER
GUIDE SELECTION |
FIBER
COATING
OR BUFFER DIAMETER TO STRIP (µm) |
REPLACEMENT
FIBER GUIDE
CATALOG NUMBER * |
| UP
TO 180 |
MS1-RT-07 |
| 180-250 |
MS1-RT-10 |
| 250-343 |
MS1-RT-13 |
| 343-407 |
MS1-RT-16 |
| 407-457 |
MS1-RT-18 |
| 457-533 |
MS1-RT-21 |
| 533-635 |
MS1-RT-25 |
| 635-787 |
MS1-RT-31 |
| 787-889 |
MS1-RT-35 |
| 889-1016 |
MS1-RT-40 |
| 1016-1168 |
MS1-RT-46 |
| 1168-1321 |
MS1-RT-52 |
| 1321-1397 |
MS1-RT-55 |
| 1397-1600 |
MS1-RT-63 |
| 1600-1702 |
MS1-RT-67 |
| 1702-1778 |
MS1-RT-70 |
| 1778-1930 |
MS1-RT-76 |
| 1930-2057 |
MS1-RT-81 |
| 2057-2184 |
MS1-RT-86 |
| 2184-2362 |
MS1-RT-93 |
I f you
are choosing to buy a custom tool with a blade set of your choosing
the bold numbers are to be placed in the 2nd blank
space for Soft-Strip® complete tool catalog number or in the
only space for Micro-Strip® complete tool catalog number.
* The section in light blue denotes guides for single
optical fibers and can be used with either Micro-Strip® or Soft-Strip®
tools.
** The section in light yellow denotes guides for single
optical fibers and can be used with Micro-Strip® tools only.
| RIBBON
GUIDE SELECTION |
| RIBBON
TYPE |
REPLACEMENT
RIBBON GUIDE CATALOG NUMBER * |
| AT&T
ASR |
MS3-RT-G1 |
| 12-FIBER
'B' 'R' |
MS3-RT-G2 |
| 4-FIBER
'E' |
MS3-RT-G3 |
| 8-FIBER
'E' |
MS3-RT-G4 |
| 4-FIBER
'B' |
MS3-RT-G5 |
| 8-FIBER
'B' |
MS3-RT-G6 |
| 10-FIBER
'E' |
MS3-RT-G7 |
| 10-FIBER
'B' |
MS3-RT-G8 |
| 6-FIBER
'B' |
MS3-RT-G10 |
| 12-FIBER
'E' |
MS3-RT-G15 |
|
